We use cookies to offer you a more personalized and smoother experience. By visiting this website, you agree to our use of cookies. If you prefer not to accept cookies or require more information, please visit our Privacy Policy.
Question: How to install OS on over 2.2TB RAID volume on ASRock 970/990FX motherboard?(5/1/2012) Answer: Please follow below SOP to install Windows Vista/7 64bit OS on the RAID volume:
Step 1: Flash BIOS to latest version.
Step 2: Connect all HDDs then do below settings:
Set [SATA Mode] as [RAID Mode]
Change [Onboard RAID 3TB+ Unlocker] to [EFI Compatible ROM]
The options are located in BIOS > [Advanced] > [Storage Configuration]
Then press F10 to save settings.
Step 3: Press F11 during boot up and choose boot to [Built-in EFI Shell].
Step 4: Key in "drvcfg", and you will see the information like below:
Drv[4E] Ctrl[B5] Lang[eng]
Step 5: Key in "dh [Drv number]", for example: key in "dh 4E".
Step 6: Key in "drvcfg –s [Drv number] [Ctrl number]" to enter Raid Utility.
For example: key in "drvcfg –s 4E B5"
Step 7: Choose [Logical Drive Main Menu] to set up Raid Drive.
Step 8: Choose [Logical Drive Create Menu] to create a Raid Drive.
Step 10: Press Space on keyboard to toggle checkbox.
Step11: Choose [Ld Size setting], and key in the Raid size.
Step12: After set up Raid size, please click [Start to Create]
Step13: Press "F10" to Exit Utility.
Step14: During reboot, please press "F11" to enter Boot Menu.
Choose UEFI: CD/DVD Drive
* This option only shows on Windows7 64bit and Vista 64bit OS.
Step 15: Follow Windows Installation Guide to install OS.
Please load latest SATA RAID driver ver.3.3.1540.22 during OS installation from our website
Step 16: Install latest drivers from ASRock website.