We use cookies to offer you a more personalized and smoother experience. By visiting this website, you agree to our use of cookies. If you prefer not to accept cookies or require more information, please visit our Privacy Policy.
Question: How to use the PCIE locker on my motherboard?(12/30/2010) Answer: So far we have below PCIE locker types, please refer below: Type1:
1. Before VGA card is installed, please move locker horizontally to the right side.
2. After install VGA card, please move the locker back to the position.
Type2:
1. Install VGA card vertically to PCIE slot.
2. To remove VGA card, please move the PCIE locker as shown below.
Type3:
1. Install VGA card vertically to PCIE slot.
2. To remove VGA card, please move the PCIE lock as shown below.
Type4:
1. Install VGA card vertically to PCIE slot.
2. To remove VGA card, please push PCIE lock as shown below:
Type5:
1. Install VGA card vertically to PCIE slot.
2. To remove VGA card, please push PCIE lock as shown below:
Type6:
1. Install VGA card vertically to PCIE slot.
2. To remove VGA card, please take up the VGA card vertically.
Note: If the lock is not present, it will not affect the quality of the connection.