Motherboards button
Moederbord Series
Graphics Card button
Grafische kaart Series
Monitors button
Monitor Gamer
Mini PC button
Mini PC Series
Industrial PC button
Industriële PC Series
Server/WS button
Server/Werkstation Series
Loading

We use cookies to offer you a more personalized and smoother experience. By visiting this website, you agree to our use of cookies. If you prefer not to accept cookies or require more information, please visit our Privacy Policy.

FAQ

  1. Ondersteuning
  2. FAQ
  3. CPU ondersteuningslijst
  4. Vinden van Modelnamen
  5. Vinden van SN
  6. Vinden van BIOS
  7. Reparatie / RMA
  8. »Contact Technische ondersteuning
  9. »Webmaster Mailbox
Als u precies weet waarover w vraag gaat dan kunt u een van deze categorieën kiezen. Categorieën:

Resultaten:
Q (Q&A-153|489): How can I remap M2_3 slot and other M.2 slots to configure a PCIE SSD RAID on Z490 Taichi?(6/1/2020)
A:Please make sure to use identical PCIE SSDs that are the same type and volume.
Follow the steps below to adjust the BIOS settings to configure the PCIe RAID.

STEP 1. Enter the UEFI Setup Utility by pressing or < Del > hotkey during the post screen.

STEP 2. Go to Advanced -> Storage Configuration and set SATA Mode Selection to [RAID Mode].

STEP 3. Go to Boot -> CSM and set Launch Storage OpROM policy to [UEFI only].

STEP 4. Adjust the M.2 slots - RST PCie Storage Remapping that you've installed PCIE SSDs to [Enabled]. Press to save the settings and exit setup.

4th BIOS screenshot 1

STEP 5. Go to Advanced -> USB Configuration and set Third Party USB 3.2 Controller to [Disabled]. Press to save the configuration changes and exit setup. Caution: After disabling the Third Party USB3.2 Controller, the onboard Type-C port will be turned off.

5th BIOS screenshot 2

STEP 6. Enter Intel(R) Rapid Storage Technology in Advanced page.

6th BIOS screenshot 3

STEP 7. Select the option Create RAID Volume and press .

7th BIOS screenshot 4

STEP 8. Key-in a volume name and press , or simply press to accept the default name.

8th BIOS screenshot 5

STEP 9. Select your desired RAID Level and press .

9th BIOS screenshot 6

STEP 10. Select the target hard drives which you want to build in RAID array and press .

10th BIOS screenshot 7

STEP 11. Select a stripe size for the RAID array and press .

11th BIOS screenshot 8

STEP 12. Select Create Volume and press to start creating the RAID array.

12th BIOS screenshot 9