Motherboards button
Serie schede madri
Graphics Card button
Serie Scheda grafica
Monitors button
Monitor Gamer
Mini PC button
Serie Mini PC
Industrial PC button
Serie PC industriali
Server/WS button
Serie server/workstation
Loading

Utilizziamo i cookie per offrirti un'esperienza più personalizzata e fluida. Visitando questo sito web, acconsenti all’utilizzo dei cookie da parte nostra. Se preferisci non accettare i cookie o hai bisogno di maggiori informazioni, consulta la nostra Informativa sulla privacy.

FAQ

  1. Supporto
  2. FAQ
  3. Lista Supporto CPU
  4. Trovare Il Nome Del Modello
  5. Trovare SN
  6. Trovare BIOS
  7. Reparazione / RMA
  8. Contatto Supporto Tecnico
  9. Contatto Problemi Web
Se siete pienamente consapevoli della categoria della vostra domanda, si può scegliere una delle categorie qui sotto per le domande più frequenti. Catalogo:

Risultati:
Q (179): My motherboard is AM2XLI-eSATA2. How do I install Windows® XP on SATA HDD in AHCI mode?(8/18/2006)
A:You need to make a SATA driver diskette before you start the OS installation. Please refer to the following steps:
  1. Enter "SATA Operation Mode" in BIOS setup to set the option to [RAID].
  2. Insert the ASRock Support CD into your optical drive to boot your system.
  3. During POST at the beginning of system boot-up, press key, and then a window for boot devices selection appears. Please select CDROM as the boot device.
  4. When you see the message on the screen, "Do you want to generate Serial ATA driver diskette [YN]?", press .
  5. Then you will see these messages,
    Please insert a diskette into the floppy drive.
    WARNING! Formatting the floppy diskette will lose ALL data in it!
    Start to format and copy files [YN]?
    Please insert a floppy diskette into the floppy drive, and press .
  6. The system will start to format the floppy diskette and copy SATA drivers into the floppy diskette.
  7. Restart and enter "SATA Operation Mode" in BIOS setup to set the option to [AHCI].
    At the beginning of Windows® setup, press F6 to install a third-party SCSI or RAID driver. When prompted, insert a floppy disk containing the ULi® RAID driver. After reading the floppy disk, the driver will be presented. Select the driver to install according to the mode you choose and the OS you install.