ASRock > FAQ

Question: What hiccups might occur if I set the BCLK over 102MHz on Intel's Skylake platform?(4/1/2016)

Answer:
1. Some functions will be disabled such as Intel iGPU, CPU Turbo Ratio, AVX and C-state etc.
2. Intel iGPU will be disabled, so please use a discrete VGA card.
3. The CPU temperature may not be read on a few models such as Z170M Pro4S, Z170M-ITX/ac, Z170M Pro4 and Z170M Extreme4.
4. There are certain risks involved with tuning the BCLK. And the results may vary between different configurations.

Question: I'm using a Beebox with an mSATA disk installed, but I can't establish a WiFi connection.(2/1/2016)

Answer:
Please choose one of the options below to connect to WiFi.
1. If you would like to use 2.4GHz band, please refer to the snapshot below to set the channel bandwidth to 20MHz.

2. Use 5GHz band to establish WiFi connection.

Question: How to enabled AMD Dual Graphics feature on AMD Platform?(3/1/2014)

Answer:
Step 1:
Please make sure that you have installed the latest BIOS and two 1866MHz or higher frequency memory modules in dual channel.
Also keep the default UEFI setting of "Dual Graphics" option on [Auto].
BIOS download link: https://www.asrock.com/support/download.asp

Step 2:
Install one AMD RADEON PCI Express graphics card to the PCIE slot.

Step 3:
Connect the monitor cable to the onboard VGA port. Please note that the current VGA driver / VBIOS allows Dual Graphics output from the onboard display only.
For any future update, please refer to our website for further information.

Step 4:
Boot into the OS.
Then please remove the AMD driver if you have any VGA driver installed in your system.

Step 5:
Install the onboard VGA driver from our support CD to your system for both the onboard VGA and the discrete graphics card.

Step 6:
Restart your computer. Right-click the desktop. Click "AMD VISION Engine Control Center" to enter AMD VISION Engine Control Center.

Step 7:
You can also click "AMD VISION Engine Control Center" on your Windows taskbar to enter AMD VISION Engine Control Center.

Step 8:
In AMD VISION Engine Control Center, please choose "Performance". Click "AMD CrossFire™".

Step 9:
Click "Enable CrossFire™" and click "Apply" to save your change.

Step 10:
Reboot your system. Then you can freely enjoy the benefit of Dual Graphics feature.

Question: I'm using the Core 2 Duo E6XXX CPU and DDRII 533/667 RAM on 775Dual-VSTA motherboard. But the system is very unstable. Sometimes it gets blue screen or fail when installing the Windows^® XP or some applications. How do I fix this problem?(9/19/2006)

Answer:
Please refer to following steps to fix this problem.

Please set the "DRAM Frequency" as "[333MHz (DDRII 667)]" in BIOS setup if you use DDRII 667 RAM. (BIOS/ Advanced/ Chipset Configuration/ DRAM Frequency)
Please enable the "Flexibility Option" in BIOS setup if you use DDRII 533 RAM. (BIOS/ Advanced/ Chipset Configuration/ Flexibility Option)
If the problem still remains, please update the BIOS to P1.80 or later version.
https://www.asrock.com/mb/download.asp?Model=775Dual-VSTA#bios

Question: I am using Geode NX CPU on ASRock K7S41 / K7S41GX / K7VT4A Pro / K7VT6-C / K7Upgrade-600 series motherboard.
How do I set FSB jumper for my CPU?(4/21/2006)

Answer:
The FSB of Geode NX CPU (1750,1500) is 266MHz. Please remember to adjust the FSB_SEL jumper to FSB 266MHz while using a NX CPU.
https://www.asrock.com/support/K7Jumper.pdf

Question: When I use DDR 400 (200 MHz) memory on my board, it shows that the DRAM frequency is running at DDR 333 (166MHz) in BIOS main page. The BIOS option "DRAM Frequency" is set at default setting "Auto". Why?(4/21/2006)

Answer:
In order to get the best system compatibility and stability, we make it to run at DDR 333 (166MHz) when DDR 400 (200MHz) memory is installed and BIOS option "DRAM Frequency" is selected to "Auto". If you want to run DDR 400 (200MHz), please kindly adjust the BIOS option "DRAM Frequency" to DDR 400 (200 MHz) manually.

Question: I am using AMD FSB 200Mhz CPU on K7VT4A PRO, I cannot set my DDR333/ DDR400 memory to DDR333/ DDR400 under BIOS setting. Why?(6/23/2005)

Answer:
For K7VT4A PRO, if you are running with FSB 200 MHz CPU, DDR SDRAM supports 266Mhz only. So you are not able to change the memory speed under BIOS setting.

Question: My CPU is Duron FSB 200 MHz CPU. Why my DDR 400 SDRAM can only run at DDR 266 speed on the K7VT6 motherboard?(12/15/2004)

Answer:
According to the specification of VIA KT600, only DDR 266 SDRAM is supported if FSB 200 MHz CPU is installed. DDR 400 SDRAM is supported with FSB 266, 333, or 400 MHz CPU. Please refer to the following supporting table.

FSB \ Memory	DDR 266	DDR 333	DDR 400
200 MHz	Yes	No	No
266 MHz	Yes	Yes	Yes
333 MHz	Yes	Yes	Yes
400 MHz	Yes	Yes	Yes

Question: I'm using K7VT4A+. From the specification on the website, this model supports FSB 333 MHz CPU. However, I found a FSB 400 MHz FSB jumper setting on the PCB of the motherboard. Can this motherboard support FSB 400 MHz CPU?(10/15/2004)

Answer:
K7VT4A+ does not support FSB 400 MHz CPU. The FSB 400 MHz jumper setting is an overclocking mode and for testing only. For system stability, it is not recommended to set the FSB jumper at FSB 400 MHz.

Question: The FSB jumper setting table of K7VT4A+ on the PCB silk screen on the board is different from the description in the installation guide. Which is correct?(8/16/2004)

Answer:
The table on the PCB silk screen of some boards is not correct. Please refer to the FSB Jumper Setting Table in the Quick Installation Guide bundled or in the user manual in ASRock Support CD.

K7VT4A+: Support FSB 200/266/333/400 (User Guide P.13)
Jumper Setting 200MHz: FSB_SEL0 : 1_2 、FSB_SEL2 : 1_2

Please move the jumper cap to FSB_SEL0 : 1_2 and FSB_SEL2 : 1_2

Jumper Setting 266MHz: FSB_SEL1 : 2_3 、FSB_SEL2 : 1_2

Please move the jumper cap to FSB_SEL1 :2_3 and FSB_SEL2 : 1_2

Jumper Setting 333 MHz：FSB_SEL0 : 2_3 、FSB_SEL2 : 1_2

Please move the jumper cap to FSB_SEL0 : 2_3 and FSB_SEL2 : 1_2

Jumper Setting 400 MHz：FSB_SEL1 : 1_2 、FSB_SEL2 : 2_3

Please move the jumper cap to FSB_SEL1 : 1_2 and FSB_SEL2 : 2_3

Question: Does my ASRock K7 motherboard, which supports Athlon XP FSB 333 MHz CPU, support AMD^® Sempron CPU?(8/16/2004)

Answer:
Yes, all ASRock motherboards, which support Athlon XP FSB 333 MHz CPU, would support AMD^® Sempron CPU by updating the BIOS. Also ASRock K8S8X motherboard would support AMD^® Sempron CPU by updating the BIOS. Please refer to ASRock web site for more information. https://www.asrock.com/support/CPU.asp

Question: My motherboard is P4i45D+ and I used FSB 800 CPU with ASUS V9520MAGIC/T/64 (or PIXELVIEW GF4-TI4200-8X-NVG28A/64M) VGA card. When I play 3D games, the appearance is lag. Why?(5/15/2004)

Answer:
It is running at over-clocking mode when using a P4 with front side bus 800 MHz CPU on P4i45D+. Thus, when playing 3D games or running 3D applications, it may not be so smooth. This is normal, and it will not affect other functions.

Question: I'm using Duron 1600MHz Applebred CPU on your K7 series motherboard. How come the CPU is only recognized as a Duron 1200MHz CPU?(11/14/2003)

Answer:
The FSB of Duron Applebred CPU (1400MHz to 1800MHz) is 266MHz. It is different from the former Duron CPU (FSB 200MHz). Please remember to adjust the FSB_SEL jumper to FSB 266MHz while using a Duron Applebred CPU.
https://www.asrock.com/support/K7Jumper.pdf

Question: Do ASRock K7 motherboards support the latest Applebred Duron CPU with FSB266 MHz, such as 1400MHz, 1600MHz, and 1800MHz?(10/15/2003)

Answer:
Yes, all ASRock K7 motherboards had been tested with Applebred Duron CPU without problem.
Please refer to https://www.asrock.com.tw/support/CPU.asp

Question: I'm using Intel FSB 400 MHz CPU, why does my DDR 333 SDRAM only run DDR 266 on P4i45GV?(10/15/2003)

Answer:
According to the Intel's specification, if you're running FSB 400 MHz CPU on P4i45GV, DDR SDRAM only supports 200/266. If you're running FSB 533 MHz CPU, DDR SDRAM supports 266/333.

Question: I'm using Intel FSB 400 MHz CPU, why does my DDR 333 only run DDR 266 on P4i45PE?(8/15/2003)

Answer:
For P4i45PE, if you're running FSB 400 MHz CPU, DDR SDRAM only supports
200/266 MHz. If you're running FSB 533 MHz CPU, DDR SDRAM supports 266/333 MHz.
If you're running FSB 800 MHz CPU, DDR SDRAM supports 400 MHz.

Question: Can I install 4 DIMM of DDR SDRAM with P4 FSB 533 MHz CPU on P4VX4 motherboard?(7/9/2003)

Answer:
If you are using P4 FSB 533 MHz CPU on P4VX4, please install 3 or less than 3 DIMM of DDR SDRAM. When you install 4 DIMM of DDR SDRAM, they would run at DDR 200(PC1600) speed. According VIA chipset SEPC, FSB 533 MHz CPU must run with DDR 266 or higher speed memory. So if you install 4 DIMM of DDR SDRAM, please run with FSB 400 MHz CPU.

Question: I'm using P4i45PE now. How do I run FSB 800 MHz correctly?(7/9/2003)

Answer:
1.Please use Intel^® FSB 800 MHz CPU for your system.
2. Please set FSB jumper in pin 2-3 (Test)
3. Please install one DDR400(PC3200) in slot 1.
DDR SDRAM requires CL=2.5 or CL=2.
Please also refer to P4i45PE memory support list.
https://www.asrock.com/mb/memory/P4i45PE.pdf

Question: When I manually increase CPU host frequency in the BIOS on K7S8X(E), will AGP and PCI speed up at the same time?(7/9/2003)

Answer:
When CPU host frequency is increased, BIOS will automatically run the AGP/PCI frequency around 66/33MHz. Therefore, AGP card and PCI devices can work under SPEC even CPU frequency is set to perform over clocking.

Question: Is there any suggestion of CPU and memory for K7S8X motherboard?(5/9/2003)

Answer:
With AMD FSB 200 MHz CPU like Duron, please install DDR 200, 266, or 333 SDRAM.
With AMD FSB 266 MHz CPU like Athlon XP 2000+, please install DDR 200, 266, 333, or 400 SDRAM.
With AMD FSB 333 MHz CPU like Athlon XP 2800+, please install DDR 266, 333, or 400 SDRAM.

Question: I'm using a AMD Athlon XP 2000+ processor with FSB 266MHz on K7S8X, but the FSB jumper can only set from 100, 133, 166MHz. How do I adjust to FSB 266MHz?(4/15/2003)

Answer:
Please understand that AMD Athlon XP 2000+ processor with FSB 266MHz is actually running with 133*2=266MHz. Please adjust the FSB jumper to 100MHz for FSB 200MHz processors, 133MHz for FSB 266MHz processors and 166MHz for 333MHz processors.

Question: Does ASRock AMD series motherboard support AMD FSB 333Mhz CPU?(4/15/2003)

Answer:
ASRock K7S8X supports AMD FSB 333Mhz processor.

Question: Why I only see 1667MHz for my Athlon XP 2000+ CPU?(3/3/2003)

Answer:
2000+ is the model number of AMD CPU, it does not represent the CPU frequency.
Please refer to http://www.amd.com for more information.

Question: How can I set CPU FSB (Front Side Bus) correctly?(1/30/2003)

Answer:
For Intel CPU: You do not need to do any setting. When you install CPU at the first time, all that you need to do is go to BIOS and "Load setup defaults", then the system will auto detect the correct CPU FSB.

For K7VT2 and K7VM2: There is a FSB_SEL jumper on the motherboard .
FSB 100Mhz set 2-3
FSB 133Mhz set 1-2

ASRock

FAQ

If you are fully aware of the category of your question, you may choose one of the categories below for frequently asked questions.

Results: