- 2 x Termistorový kabel Headers
- 1 x Power LED and Speaker Header
- 1 x RGB LED Header
*- 3 x Addressable LED Headers
**- 2 x CPU Fan Connector (4-pin) (Smart Fan Speed Control)
***- 4 x Chassis Fan Connectors (4-pin) (Smart Fan Speed Control)
***- 1 x AIO Pump Fan Connector (4-pin) (Smart Fan Speed Control)
***- 1 x 24 pin ATX Power Connector (Hi-Density Power Connector)
- 2 x 8 pin 12V Power Connectors (Hi-Density Power Connector)
- 1 x 6 pin Graphics 12V Power Connector (Hi-Density Power Connector)
****- 1 x Front Panel Audio Connector (15μ Gold Audio Connector)
- 3 x USB 2.0 Headers (Support 6 USB 2.0 ports)
- 1 x USB 3.2 Gen1 Header (Support 2 USB 3.2 Gen1 ports)
- 2 x Front Panel Type C USB 3.2 Gen2x2 Headers (20 Gb/s)
*****- 1 x Dr. Debug with LED
- 1 x Power Button with LED
- 1 x Reset Button with LED
- 1 x Retry Button
- 1 x Safe Boot Button
- V-Probe™: 6-set of onboard voltage measurement points laid
- Rapid OC Buttons: +/- buttons to adjust OC frequency
- 1 x Slow Mode Switch
- 1 x LN2 Mode Switch
- 1 x NickShih's OC Profile 1 Button with LED
- 1 x NickShih's OC Profile 2 Button with LED
- 1 x NickShih's OC Profile 3 Button with LED
* Supports in total up to 12V/3A, 36W LED Strip
** Support in total up to 5V/3A, 15W LED Strip
*** CPU_FAN1 podporuje napájení ventilátoru až do 1A (12W).
CPU_FAN2, CHA_FAN1~4 a AIO_PUMP podporují napájení ventilátorů až do 3A (36W).
CPU_FAN2, CHA_FAN1~4 a AIO_PUMP mohou automaticky detekovat, zda se používá 3pinový nebo 4pinový ventilátor.
**** It is recommended to connect a 6 pin PCIE 12V Power Cable to GFX_36WTC2_12V1 when you use both USB32_TC2 and PCIe Slots.
***** USB32_TC2 Podpora nabíjení přes USB PD 3.0 až do 12V@3A (36W); USB32_TC3 Podpora nabíjení přes USB PD 3.0 až do 5V@3A (15W).