If you are fully aware of the category of your question, you may choose one of the categories below for frequently asked questions.
Catalogue: General FAQ
, HDD FAQ
, VGA FAQ
, Audio FAQ
I plugged a headphone in my ASRock motherboard with Realtek HD Audio, and set the "Audio I/O" from "2CH" to "Headphone" in Realtek Audio Manager (picture1).
But the Realtek Audio Manager always recognized my headphone as 2CH speaker after I restarted the operating system (picture2).
What should I do?(1/16/2007)
Answer:Please refer to the following steps to set up the Realtek Audio Manager correctly.
1.Please remove all audio I/O (Headphones, Speakers, Microphone...) from the motherboard.
2.Please go to Realtek Audio Manager and set the "Audio I/O" you want.
4.Please plug your audio I/O back.
5.Restart your system.
© 2002-2013 ASRock Inc. All rights reserved. | Information published on ASRock.com is subject to change without notice.
The picture of the user interface above is a sample for reference. The actual user interface may vary due to updated software versions.