|
939SLI-eSATA2
FAQ
Question ( Q&A-43):How do I use 4 SATA HDDs to build system in RAID0 mode on K8SLI-eSATA2, 939SLI-eSATA2 and 939SLI32-eSATA2? (5/24/2006) Answer:If you want to build a system in RAID 0 mode with 4 SATA HDDs, please follow below steps:
1.Enter the BIOS and set "SATA Operation Mode" to RAID mode.
BIOS -> Advance -> IDE Configuration -> SATA Operation Mode -> RAID
2.Set "eSATAII Support" to Disable.
BIOS -> Advance -> IDE Configuration -> eSATAII Support -> Disable
3.Press "F10" to save and exit.
4.When you boot up system, press "CTRL+ A" to go into ULI RAID Utility screen, and choose "Create RAID 0 Stripe X4 for Performance" option to build a RAID system with 4 SATA HDDs.
You could refer BIOS SETUP UTILITY of user manual to adjust BIOS setting.
K8SLI-eSATA2 user manual page 42.
http://download.asrock.com/manual/K8SLI-eSATA2.pdf
939SLI-eSATA2 user manual page 43.
http://download.asrock.com/manual/939SLI-eSATA2.pdf
939SLI32-eSATA2 user manual page 41.
http://download.asrock.com/manual/939SLI32-eSATA2.pdf
Please see General FAQ, HDD FAQ, Audio FAQ, VGA FAQ for reference.
| |
