775XFire-RAID
FAQ
Question ( Q&A-42):How do I enable Intel ® Matrix Storage Manager on 775XFire-eSATA2 and 775XFire-RAID? (4/21/2006) Answer:In order to enable Intel ® Matrix Storage Manager, please refer to the following steps: - Enter into BIOS to set your SATA hard disk in AHCI mode or RAID mode.
(BIOS->Advance->IDE Configuration ->Configure SATA as-> [ AHCI or RAID] )
- Make a SATA driver diskette with support CD before installing your system.
- Please press "F6" to load Intel® SATA driver during operating system setup.
Please refer to Setting Up a "RAID Ready" System of User Manual of Support CD. (...\Information\Manual\User\)
- Install the SATA2 Driver from support CD after the installation of Windows® 2000 / Windows® XP / Windows® XP 64-bit OS.
Question ( Q&A-41):My motherboard is 775XFire-RAID, its SATA controller is in Intel ® ICH6R. But when I install windows 2000/XP and press F6 to load the SATA driver diskette, I cannot see the items for ICH6R. What should I do? (3/20/2006) Answer:Please press "↓" to expend the menu. The items of ICH6R are under the items of ICH7R. Please choose RAID or AHCI that correspond with the item "Configure SATA as" in BIOS settings. 
Please see General FAQ, HDD FAQ, Audio FAQ, VGA FAQ for reference.
| 
