.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
| Form Factor | |
| Dimensions | - Mini-ITX (6.7-in x 6.7-in) |
| Processor System | |
| CPU | - Socket G2 (rPGA988B) for Intel® Core i7/i5/i3/Celeron (Sandy Bridge and Ivy Bridge) |
| Core Number | - (By CPU, Max 4) |
| Max Speed | - (By CPU) |
| L3 Cache | - (By CPU) |
| Chipset | - QM77 |
| BIOS | - UEFI |
| Expansion Slot | |
| PCI | - 0 |
| Mini-PCIe | - 1 (Full size) |
| mSATA | - 0 |
| PCIe | - 1 (IVY Bridge: Gen3; Sandy Bridge: Gen2) |
| CFast Card Socket | - 0 |
| Memory | |
| Technology | - Dual Channel DDR3 1066/1333/1600 MHz SDRAM |
| Max. | - 16GB |
| Socket | - 2 x SO-DIMM |
| Graphics | |
| Controller | - Intel® HD Graphics (By CPU) |
| VRAM | - Shared Memory |
| VGA | - No |
| LVDS | - Dual channel 24-bit, max resolution 1920x1200@60Hz |
| HDMI | - Supports HDMI 1.4a, max resolution 1920x1200 |
| DVI | - Supports max resolution 1920x1200 |
| DisplayPort | - Supports max resolution 2560x1600 |
| MultiDisplay | - Yes |
| Ethernet | |
| Ethernet | - 10/100/1000 Mbps |
| Controller | - GbE LAN1: Intel® 82579LM, LAN2: Intel® 82583V |
| Connector | - 2 x RJ-45 |
| SATA | |
| Max Data Transfer Rate | - 2 x SATA2 (3.0Gb/s), 2 x SATA3 (6.0Gb/s), Supports RAID 0/1/5 |
| Rear I/O | |
| VGA | - 0 |
| DVI | - 1 (DVI-I) |
| HDMI | - 1 |
| DisplayPort | - 1 |
| Ethernet | - 2 |
| USB | - 6 (4 x USB 2.0 compliant, 2 x USB 3.0 compliant) |
| Audio | - 3 (Mic-in, Line-out, Line-in) |
| Serial | - 2 (RS-232/422/485) |
| PS2 | - 1 (Combo) |
| Internal Connector | |
| USB | - 6 (4 x USB 2.0 compliant, 2 x USB 3.0 compliant) |
| LVDS / inverter | - 1/1 |
| VGA | - 0 |
| Serial | - 4 (RS-232) |
| SATA | - 2 x SATA2 (3.0Gb/s) + 2 x SATA3 (6.0Gb/s), Support RAID 0/1/5/10 |
| mPCIe | - 1 |
| Parallel | - 1 |
| mSATA | - 0 |
| IrDA | - 0 |
| GPIO 8-bit | - 4 x GPI + 4 x GPO |
| SATA PWR Output Con | - 1 |
| Speaker Header | - 1 |
| Watchdog Timer | |
| Output | - From Super I/O to drag RESETCON# |
| Interval | - 256 segments, 0,1,2…255sec/min |
| Power Requirements | |
| Input PWR | - 12V DC-In (4-pin ATX PWR Con) |
| Power On | AT/ATX Supported - AT : Directly PWR on as Power input ready - ATX: Press Button to PWR on after Power input ready |
| Environment | |
| Temperature | - 0ºC – 60ºC |
The specification is subject to change without notice in advance. The brand and product names are trademarks of their respective companies. Any configuration other than original product specification is not guaranteed.
.jpg)
.jpg)